Precauções para tijolos faça você mesmo?
1. In the process of slotting and routing, great care should be taken to prevent damage to the steel bars, and cross-cutting is not allowed. Of course, in the process of burying the pipeline, it is not allowed to destroy the steel bars, because it will directly affect the bearing capacity of the walls and floors. When unpacking and moving one by one, be careful not to scratch the Corners dos tijolos sobre o padrão de outros tijolos . Evite atrito entre dois tijolos ao mover um, mesmo com um filme de proteção na superfície .
2. As partes de conexão das paredes antigas e novas devem ser tratadas com barras de plantio, para que as paredes possam ser conectadas firmemente ., no entanto, o vergalhão precisa ser reforçado para a parede antiga, e a profundidade deve ser profunda, e o intervalo entre os verbas é de cerca de 50 cm.
3. In order to avoid hardening of the mortar, it is recommended not to make the laying length of the mortar too long when laying the wall, generally only about 75 cm is enough. If the site ambient temperature exceeds 30 degrees, the laying length of mortar should not exceed 50 cm.







